Separate names with a comma.
If E3D can't supply the Gates one, I would suggest you try RobotDigg. They're an odd bunch but usually their quality is acceptable. I think your...
I second what JFB said. The raft uses isolated strands so the nozzle being too close doesn't quite stall the extruder but the infill on a regular...
Amazing! Absolutely stunning!
Old-Tafr's suggestions are all good. Remember what you are testing with the probe is the distance from the X-guide rods to the top of the bed....
You are correct. Your config.g will end up with a staement like M574 X1 Y1 Z0 S1 to convey this to the Duet. One nice think is after you've...
Assuming it's the same spring as the original Titan, and you're in North America get it HERE
Here's a zip file with the STL files, some photos, some notes, and a rough bill-of-materials (BOM) EphBox Mirrored Titan Files I won't be...
That's a very good idea. I'll give it some thought. I am almost done with the BOM. Once I get that done I'll zip up the files for the whole XY...
Ideally you want the layer thickness to correspond to an integral number of stepper steps. If you have the original BigBox kit that came with...
If you think it will help him, I'll be happy to package up all the files. I'll need to make a custom bill-of-materials so he can see exactly what...
[ATTACH] I finished this design several months ago but never got around to posting the results. Having used Chase Wichert's brilliant Dual Titan...
Everything should be there but some of it is oddly filed. In any case I think the attached file is the original. If you have issues, either...
So far as I know, there was the original 1.0 dual using a printed dual extruder and the 1.1 which was the hybrid. Chase Wichert designed the dual...
I'm talking the separate Tr8x2 leadscrews not the integrated ones that are part of the stepper shaft Greg has. My comment is about the leadscrews...
Glad to help. Sorry about the bent one. Getting dead straight leadscrews is a real challenge. As you may recall I got so frustrated with what was...
Does Z move 10mm if you command it to move 10mm?
If I recall correctly, the Astrosyn damper for a NEMA 17 stepper is less than $10 USD. Not sure who the best source is in the UK. The consensus...
If you remove the filament and just let it sit there, do the steppers make a buzzing noise? That would be a sign the stepper is miswired. Of...
Did you have the command M564 H0 in your config.g?
Two questions: 1) Was hming previously working? 2) What version of the Duet firmware are you using?