Separate names with a comma.
Hi I have this printer for over a month but it's making this cracking sound since the start. I already detached the horizontal black bars the...
Well.. From the beginning (bigbox titan hybrid model) this happened randomly. I have yet to ever figure out why it's happening. When it prints...
i am having a strange problem. I start with a bed that is pretty level. After running a print, the right hand side of the bed is now lower than...
Afternoon all, I was involved in Jet's post "Inconsistent Printed Height Variations" as I thought I was having similar issues but I'm beginning...
So I finally at the stage where I am getting ready for my first print. All axis are homed and everything is ready to go. I have the 8 mm pitch...
What do people think about the idea of solvent welding the struts to the bottom z-axis bed? I have both a pure solvent (Weld On 4) and an acrylic...
Hello everybody, I just almost finished my BigBox Pro and I'm at the step of testing the Z-Axis motion. When trying to move the Z-Axis via the...
Ok, first, I looked all over for these details, but have not seen these questions answered specifically. Hope I did not miss it. Feels so close...
Hi, we have a BigBox Dual and were very satisfied with printing quality at first. Now we are getting weird problems with the z-axis: Sometimes in...
So I'm in the final stages of assembling my Pro. I'm currently stuck on the z-axis calibration step. After choosing "Move Axis" -> "0.1mm" ->...
The manual says to the z-axis calibration: Via the menus run the bed all the way down to the bottom. [IMG] I can move the bed to position Z:...
