180% upscaled Hedgehog Disc with Planetary Gearset

Discussion in 'Show off' started by JohnEsc, Feb 18, 2016.

  1. JohnEsc

    JohnEsc Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    229
    Likes Received:
    144
    Original wheel was too small for our hedgehog. After finding the correct angle in SD3, the BigBox was able to output this 180% upscaled disc after 29 hours!
    [​IMG]
    http://www.thingiverse.com/make:196677
     
    PsyVision, mike01hu and Mike Kelly like this.
  2. Miasmictruth

    Miasmictruth Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    804
    Likes Received:
    118
    How freely does the planetary gear allow the disk to spin?
     
  3. Henry feldman

    Henry feldman Well-Known Member

    Joined:
    Sep 5, 2015
    Messages:
    969
    Likes Received:
    391
    How did that take 29 hours (or is that way bigger than I think it is?)?
     
  4. Falc.be

    Falc.be Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    263
    Likes Received:
    40
    allot of support
     
    JohnEsc likes this.
  5. Henry feldman

    Henry feldman Well-Known Member

    Joined:
    Sep 5, 2015
    Messages:
    969
    Likes Received:
    391
    Ah. How big is that (the photo seems about the size of a small dinner plate)?
     
  6. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 7, 2014
    Messages:
    450
    Likes Received:
    93
    Takes up almost the entire build volume, probably around 12" diameter or so:

    hmm the google plus link preview isn't working i don't think,
     
    JohnEsc likes this.
  7. JohnEsc

    JohnEsc Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    229
    Likes Received:
    144
    The original at 100% was the size of a small dinner plate. This yellow one I printed with the BigBox upscaled to 180% is around 12" in diameter as Mike Kelly mentioned... https://goo.gl/photos/5TrcXZoKuqoHV7DU8
     

Share This Page