Another Mosquito hot end tool mount. This uses the 713Maker mount. The corners need to be filed down on the mosquito no more than .02 in. This is the toolhead: https://a360.co/2Swv1hm This is the fan shroud (download enabled): https://a360.co/2Lu2lBS Here is a starting point for offsets: Code: G10 P2 X-9 Y39 Z-7.65 ; T2 Mosquito Bowden
Hello Schneik! When you are using the mosquito nozzle, how about the leakage problem after the nozzle is withdrawn? Will it get clogged easily?