BB Side Panels, no fittings?

Discussion in 'Build Help' started by Old_Tafr, Apr 1, 2016.

  1. Old_Tafr

    Old_Tafr Well-Known Member

    Joined:
    Mar 7, 2016
    Messages:
    731
    Likes Received:
    93
    Having finished the build and printed the test piece and a simple design I thought I would use up the spare M4 screws and nuts.

    I had assumed as I didn't have any printed parts left that the side panels fitted outside of the frame, but then found they fit in the frame a little like the base inspection hatch. But although I have plenty of M4 screws that fit the holes the panels fit flush so they will need fittings similar to the inspection hatch ones, not the same as the hatch uses microbarbs.

    Is this a PIY (Print It Yourself) part of the kit? If so is there a ready made design we can download and print?
     
  2. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,411
    Likes Received:
    735
    Yes and yes.
    Look here and here.
     
    Alex Stevenson likes this.

Share This Page