Bigbox Firmware Plugin on Octopi

Discussion in 'BigBox General Chat' started by FrankG, Jun 24, 2018.

  1. FrankG

    FrankG Member

    Joined:
    Sep 2, 2016
    Messages:
    5
    Likes Received:
    1
    Try to print a PPSU Filament on Bigbox Hybrid.

    Needs 380 C to print.

    On Original FW 1.1.0 RC6 get a MAXTEMP Error at 300 C.

    So i made a copy of Original Firmware and edited the Extruder Max Temp to 400 C.
    I try to flash this in Bigbox via the Plugin.

    It get

    Starting......
    Checking out selected branch...
    Already on '1.0.x'
    Your branch is up-to-date with 'origin/1.0.x'.
    Updating selected branch...
    HEAD is now at b3e60b4 Update reference to out wiki
    Your branch is up-to-date with 'origin/1.0.x'.
    Already on '1.0.x'
    Writing configuration..........
    Fertig!

    But nothing changed.
    Is the Plugin broken in newer Octopi ?
     
  2. FrankG

    FrankG Member

    Joined:
    Sep 2, 2016
    Messages:
    5
    Likes Received:
    1
    Sorry fixed.

    The branch must set up to Hybrid Dual.

    Then it writes the config changes.

    Ready for a first test print.
     
    Ephemeris likes this.

Share This Page