BigBox Pro 1.1 with Hybrid Titan Upgrade

Discussion in 'Build Help' started by Fabricarum, Jun 3, 2016.

  1. Fabricarum

    Fabricarum Member

    Joined:
    Dec 22, 2015
    Messages:
    16
    Likes Received:
    2
    I'm lost in my "BigBox Pro 1.1 with Hybrid Titan Upgrade" assembly :confused:. According the following picture in the wiki there is a huge printed part "E-AXIS CARRIAGE TOP HYBRID TITAN DIRECT" between the motor and the Titan:

    http://wiki.e3d-online.com/wiki/File:EXTRUDER_HYBRID_TITAN_DIRECT.jpg

    Is this really the right picture for a "BigBox Pro 1.1 with Hybrid Titan Upgrade Direct" Setup?

    When I follow the instructions for Titan assembly, I see a total different printed part (EDS Titan Bracket that I have to print???) between motor and Titan:

    http://wiki.e3d-online.com/wiki/File:TITAN-AFFIX-BODY.jpg
    http://wiki.e3d-online.com/wiki/File:TITAN-PTFE.png

    I'm totally confused...
     
  2. Sarah Nicholson

    Sarah Nicholson Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    319
    Likes Received:
    114
    For me that part was in the extras box, maybe have a look there? It's a square bracket the size of a NEMA 17.

    The Titan assembly docs are generic and not specific to BigBox, the picture there shows a slightly different bracket that you would use to mount it to a different printer. The first image shows the orientation of the bracket you need to follow for the BigBox. Hope that helps?
     
  3. Old_Tafr

    Old_Tafr Well-Known Member

    Joined:
    Mar 7, 2016
    Messages:
    561
    Likes Received:
    75
    The part in the first ref you quote ...

    http://wiki.e3d-online.com/wiki/File:EXTRUDER_HYBRID_TITAN_DIRECT.jpg

    is the one that they both suggest you print if you are making the parts yourself, and the part supplied if you order the printed parts, in both cases for making the upgrade from a BB 1.0 (already built) to the Titan.

    The part is not too big 2 3/4" * 2 1/2" square and 1 3/4 " high, and significantly smaller than the BB 1.0 X-Carriage.
     
  4. Fabricarum

    Fabricarum Member

    Joined:
    Dec 22, 2015
    Messages:
    16
    Likes Received:
    2
    This means the setup will look like this and this bracket will be between extruder and heatsink?
     

    Attached Files:

  5. Sarah Nicholson

    Sarah Nicholson Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    319
    Likes Received:
    114
    Yep that's it.
     
    Fabricarum likes this.
  6. Fabricarum

    Fabricarum Member

    Joined:
    Dec 22, 2015
    Messages:
    16
    Likes Received:
    2
    Thanks a lot! Hopefully I did not miss anything:
    20160603_170249-01.jpeg 20160603_163926-01.jpeg
     
  7. Sarah Nicholson

    Sarah Nicholson Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    319
    Likes Received:
    114
    Looks good, although you won't need the PTFE tube in the top since you'll be running the feed tube from the spool into there eventually. Doesn't do any harm to keep it there now for initial filament calibration though. You'll also fit the bottom tube in a later step when you build the hot ends. Also make sure you removed the inner black collet from the Bowden adaptor.
     

Share This Page