I have just started building my BigBox Pro V1.1 (Hybrid) but trying to follow the Part Preparation Wiki (http://wiki.e3d-online.com/wiki/BigBox_Parts_Preparation) I found that the assembly instructions for the Hybrid X-Carriage and the Hybrid IR Sensor Braket are missing. There are links to some pictures but they looks broken. Is it possible to find the assembly drawings (with part list) anywhere else? Any help would be really appreciated. Thanks, Marco
Well, I assume there would be an assembly drawing with parts list for all the components. Instead component 9 (Hybrid X-Carriage) and component 16 (Hybrid IR Sensor Bracket) have no such drawing, but there are small broken links saying 800px.
I think there are no technical drawings or someone forgot to upload them... I don't find them... So the sections show what to do, there should be no problems assembling it...
Ah I see the ones you mean now, funnily I never noticed those before. Yes, it looks like there should be some exploded drawings like the 1.0 assemblies. But as Alex said you should be ok just with the photos, it's not a particularly complex assembly. It often helps to read through all the steps first so you have a good idea of what you're doing and what parts you'll need. Don't forget you can click on the photos and get pretty high res versions if you need to zoom in to look at details.
It would have been nice to have a confirmation of the parts for the IR sensor, as the M2.5 Square Nuts seem the best fit to me, but there are no screws with the right length. Also, the Hybrid X-Carriage seem completely different from the dual and the pro: where have the vertical supports gone? I thought something was missing, but maybe the final part is the one in the picture after all...
Hmm... I completed the sensor stage a couple of weeks ago and have no recollection of any problems, the right sized screws were in the kit and it took only a few moments to complete. Might be worth checking the change log to see if the missing images were recently deleted perhaps?
