C-axis connector pin out

Discussion in 'Tool heads & ToolChanger' started by JB24, Dec 21, 2019.

  1. JB24

    JB24 Member

    Joined:
    Nov 26, 2019
    Messages:
    5
    Likes Received:
    4
    Anyone know off hand the connector pin out for c-axis motor? My multimeter just died so I can't check for continuity at the moment. Thanks!
     
  2. John Meacham

    John Meacham Well-Known Member

    Joined:
    Dec 18, 2019
    Messages:
    70
    Likes Received:
    24
    You can check by shorting two wires together and seeing if the motor is more difficult to turn by hand. If it is, you have found the two ends of a coil.
     
  3. Rob Heinzonly

    Rob Heinzonly Well-Known Member

    Joined:
    Sep 20, 2015
    Messages:
    448
    Likes Received:
    174
    @JB24 : I cut off the conecor of the C-axis motor and extrended the wires with (sort of) the same colors. Here is what I have:
    1B: grey
    1A: black
    2A: orange
    2B: blue
     
  4. Greg_The_Maker

    Greg_The_Maker Administrator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    1,035
    Likes Received:
    632
    Datasheet.
     

    Attached Files:

Share This Page