C Coupler wires

Discussion in 'Tool heads & ToolChanger' started by ryan mckenna, May 3, 2020.

  1. ryan mckenna

    ryan mckenna Member

    Joined:
    Mar 12, 2020
    Messages:
    15
    Likes Received:
    1
    Is this how I should wire the C coupler stepper motor?

    [​IMG]

    [​IMG]
     
  2. dc42

    dc42 Well-Known Member

    Joined:
    Aug 16, 2016
    Messages:
    405
    Likes Received:
    191
    I don't know the official wiring order, but that one is safe. At worst the coupler will turn the opposite way, but if it does then you can correct that in the M569 command in config.g.
     

Share This Page