Calibration Files Missing from Rumba SD card

Discussion in 'Calibration, Help, and Troubleshooting' started by Old_Tafr, Apr 14, 2016.

  1. Old_Tafr

    Old_Tafr Well-Known Member

    Joined:
    Mar 7, 2016
    Messages:
    731
    Likes Received:
    93
    Somehow I seem to have "lost" the calibration files normally found in the Rumba (mounted in the front panel display) SD card.

    These are the files to calibrate the amount of filament extruded... the measure 120 mm bit.

    Are these files available elsewhere?
     
  2. Richard Barbosa

    Richard Barbosa Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    48
    Likes Received:
    24
    Yes...the online files that you can find the link to on your kickstarter campaign updates page
     
    Old_Tafr likes this.
  3. Old_Tafr

    Old_Tafr Well-Known Member

    Joined:
    Mar 7, 2016
    Messages:
    731
    Likes Received:
    93
    yes RTFM :) I found them
     

Share This Page