Creality CR-10Max Freezes in mid air

Discussion in 'Troubleshooting' started by Dariv, Apr 1, 2022.

  1. Dariv

    Dariv Member

    Joined:
    Apr 1, 2022
    Messages:
    2
    Likes Received:
    0
    I'm total noob when it comes to 3D printing, so i have no idea what is going on with this.
    See the issue on youtube:



    Cura G-Code:

    Start:

    M201 X500.00 Y500.00 Z100.00 E5000.00 ; Setup machine max acceleration

    M203 X500.00 Y500.00 Z10.00 E50.00 ; Setup machine max feedrate

    M204 P500.00 R1000.00 T500.00 ; Setup Print/Retract/Travel acceleration

    M205 X8.00 Y8.00 Z0.40 E5.00 ; Setup Jerk

    M220 S100 ; Reset Feedrate

    M221 S100 ; Reset Flowrate



    G28 ; Home

    G29 ; Auto bed Level

    M107 ; Turn layer fan off

    G92 E0 ; Reset Extruder

    G1 Z2.0 F3000 ; Move Z Axis up

    G1 X10.1 Y20 Z0.28 F5000.0 ; Move to start position

    G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ; Draw the first line

    G1 X10.4 Y200.0 Z0.28 F5000.0 ; Move to side a little

    G1 X10.4 Y20 Z0.28 F1500.0 E30 ; Draw the second line

    G92 E0 ; Reset Extruder

    G1 Z2.0 F3000 ; Move Z Axis up



    End:

    G91 ;Relative positioning

    G1 E-2 F2700 ;Retract a bit

    G1 E-2 Z0.2 F2400 ;Retract and raise Z

    G1 X5 Y5 F3000 ;Wipe out

    G1 Z10 ;Raise Z more

    G90 ;Absolute positioning

    G1 X0 Y{machine_depth} ;Present print

    M106 S0 ;Turn-off fan

    M104 S0 ;Turn-off hotend

    M140 S0 ;Turn-off bed

    M84 X Y E ;Disable all steppers but Z
     
    #1 Dariv, Apr 1, 2022
    Last edited: Apr 1, 2022
  2. Dariv

    Dariv Member

    Joined:
    Apr 1, 2022
    Messages:
    2
    Likes Received:
    0
    Solved.
    Connect printer to your computer, using a terminal program like Pronterface an send M119 to get the status of you end-stops.
    Worked once Connected to the PC via USB and run the program. Then the program shows all the errors you can find on YouTube.
    Worked for me
     
  3. RobBernal

    RobBernal Member

    Joined:
    Aug 8, 2021
    Messages:
    3
    Likes Received:
    0
    Thank you for sharing! It's great that the program is free. But easy reset and reinstall are the options too sometimes. Hate tronxy printers for that. Got it for 2 years, want to forget that!
     
    #3 RobBernal, Apr 10, 2022
    Last edited: Apr 11, 2022

Share This Page