Cycops cilynder

Discussion in 'Multi-Extrusion' started by Aníbal, Jan 13, 2021.

  1. Aníbal

    Aníbal Member

    Joined:
    Oct 21, 2020
    Messages:
    7
    Likes Received:
    0
    Hello, I bought a part of the hotend cyclps and they delivered them together with 4 small 10mm long cylinders. Does anyone know where they are placed?

    THANKS


    [​IMG] [​IMG]
     
  2. Old_Tafr

    Old_Tafr Well-Known Member

    Joined:
    Mar 7, 2016
    Messages:
    730
    Likes Received:
    93
    Use the power of the web and duckduckgo.com (search engin) search on...

    "E3D crimp tubes"

    and/or also read the install instructions... (just the first hit so not sure they are the correct ones for your kit)

    https://wiki.e3d-online.com/File:Cyclops_Assembly_-_Ferrule_in_place.jpg

    Where the kind people at E3D explain the assembly procedure :)

    Here you will find that these are crimp tubes.

    Follow the instructions carefully e.g. to bend (loop) the wires round each other to make a good mechanical joint before crimping the tube onto the wires.

    Spend money on a good crimp tool

    Not sure about (not?) using heat-shrink over the bare connection (but I have not read all the instructions)

    Keep Safe !
     
    Aníbal likes this.

Share This Page