Documentation dimensions missing

Discussion in 'E3D-v6 and Lite6' started by wbrokow1, Jul 2, 2014.

  1. wbrokow1

    wbrokow1 Member

    Joined:
    Jul 2, 2014
    Messages:
    3
    Likes Received:
    0
    On the drawing for the v6 heat sink the the depth of the 1.5mm wide grooves are missing.
    That would be a total of 12 dimensions.
    If you could get that info to me I would appreciate it.

    Also, is their a US source for the thermistor for the v6?

    Thank you very much
    Walter
     
  2. Eaglezsoar

    Eaglezsoar Administrator

    Joined:
    Mar 7, 2014
    Messages:
    267
    Likes Received:
    0
    The thermistor is listed at mouser.com: http://www.mouser.com/ProductDetail/Sem ... h3gA%3d%3d
     
  3. elmoret

    elmoret Administrator

    Joined:
    Mar 1, 2014
    Messages:
    586
    Likes Received:
    91
  4. Josh

    Josh Administrator
    Staff Member

    Joined:
    Feb 26, 2014
    Messages:
    183
    Likes Received:
    38
    Hi Walter,

    Normally we just publish our drawings with the external dimensions to keep things simple. I have uploaded a full drawing for you with all dimensions and tolerances. Please see: http://files.e3d-online.com/v6/Drawings ... K-FULL.pdf.

    Out of curiosity what do you need those dimensions for?

    Cheers,
    Josh
     
  5. wbrokow1

    wbrokow1 Member

    Joined:
    Jul 2, 2014
    Messages:
    3
    Likes Received:
    0
    I will be machining parts to make a v6 for myself.
    I will be making a slight modification to make the top collar fit better into a kossel mini effector. the thickness of the collar is ~1mm+ thinner. and I dont want to purchase one and then have to make a spacer.
    I can save some money too.
     
  6. wbrokow1

    wbrokow1 Member

    Joined:
    Jul 2, 2014
    Messages:
    3
    Likes Received:
    0
    Thanks for the drawing!
     
  7. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 7, 2014
    Messages:
    444
    Likes Received:
    89
    Thanks!
     

Share This Page