http://pastebin.com/w9fw8T8E upload error.... still doesn't display it in the ports.... within the program for the board
Error using standard USB connection: Sketch uses 125,192 bytes (49%) of program storage space. Maximum is 253,952 bytes. Global variables use 5,418 bytes (66%) of dynamic memory, leaving 2,774 bytes for local variables. Maximum is 8,192 bytes. avrdude: ser_open(): can't open device "/dev/cu.usbmodem1441": No such file or directory ioctl("TIOCMGET"): Inappropriate ioctl for device ioctl("TIOCMGET"): Inappropriate ioctl for device avrdude: ser_send(): write error: Bad file descriptor avrdude: stk500_send(): failed to send command to serial port avrdude: stk500v2_ReceiveMessage(): timeout avrdude: ser_send(): write error: Bad file descriptor avrdude: stk500_send(): failed to send command to serial port avrdude: stk500v2_ReceiveMessage(): timeout avrdude: ser_send(): write error: Bad file descriptor avrdude: stk500_send(): failed to send command to serial port avrdude: stk500v2_ReceiveMessage(): timeout avrdude: ser_send(): write error: Bad file descriptor avrdude: stk500_send(): failed to send command to serial port avrdude: stk500v2_ReceiveMessage(): timeout avrdude: ser_send(): write error: Bad file descriptor avrdude: stk500_send(): failed to send command to serial port avrdude: stk500v2_ReceiveMessage(): timeout avrdude: ser_send(): write error: Bad file descriptor avrdude: stk500_send(): failed to send command to serial port avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_getsync(): timeout communicating with programmer the selected serial port avrdude: stk500v2_getsync(): timeout communicating with programmer does not exist or your board is not connected