SOLVED Duet wifi, E3d v6 temp errors

Discussion in 'Calibration, Help, and Troubleshooting' started by magdi, Mar 5, 2019.

  1. magdi

    magdi Member

    Joined:
    Mar 5, 2019
    Messages:
    2
    Likes Received:
    1
    hi guys, i have recently got a swanky new duet board. but ive been having loads of issues with the temp settings.
    currently i have 2 e3d v6 in a bigbox 1.1 titan.
    both hotends are not working, theyre stone cold- but are at 300C on the duet interface.
    currently ive just plugged in the thermistor into the duet board not via the pt100 as people have done it on the forum. but i cant seem to get it to work.


    any ideas as to how to do it. ive been looking at this post: https://forum.e3d-online.com/threads/bigbox-duetwifi-controller.1766/
    but with no avail ughhhh
     
  2. magdi

    magdi Member

    Joined:
    Mar 5, 2019
    Messages:
    2
    Likes Received:
    1
    needed to get a Semitec 104GT thermistor not just used the pt100 without the amp.
     
    mhe likes this.
  3. dc42

    dc42 Well-Known Member

    Joined:
    Aug 16, 2016
    Messages:
    448
    Likes Received:
    203
    mhe likes this.

Share This Page