E3D V6 Fan and Thermistor connector type?

Discussion in 'E3D-v6 and Lite6' started by Natari, May 19, 2018.

  1. Natari

    Natari Member

    Joined:
    May 19, 2018
    Messages:
    3
    Likes Received:
    0
    Does anyone know the type of electrical connectors used on cooling fan and thermistor wires of the V6? I want to use the same connectors for the thermistor on my heat bed.
     
  2. Natari

    Natari Member

    Joined:
    May 19, 2018
    Messages:
    3
    Likes Received:
    0
    Nevermind I found them; they are Molex Microfit 3.0 single row connectors. I think these are the part numbers:
    Receptical: 43645-0200
    Plug: 043640-0201
    Male Crimp: 043031-0001
    Female Crimp: 43030-0001
     
  3. Old_Tafr

    Old_Tafr Well-Known Member

    Joined:
    Mar 7, 2016
    Messages:
    660
    Likes Received:
    87
    A search on Molex will probably find some other posts, I remember one where one of the four pins/sockets had an incorrect part number.

    OK a search does not find anything, but I know there are several posts. Search has been particularly poor for a while, Google works better.

    https://forum.e3d-online.com/threads/molex-connectors.1885/

    https://forum.e3d-online.com/threads/molex-micro-fit-setup.1323/

    https://forum.e3d-online.com/threads/new-style-e3d-connectors.2289/

    https://forum.e3d-online.com/threads/molex-micro-fit-setup.1323/page-2

    there are more...
     
    #3 Old_Tafr, May 24, 2018
    Last edited: May 24, 2018

Share This Page