Robo3d R1 Plus with e3d v6 hot head not getting hot. I used the https://www.dropbox.com/s/1xcyaamafr9odow/Robo3dR1V2_M8_E3D.zip?dl=0 Firm ware update from e3d and everything else works except the head is not getting hot. Also made sure the heater cartridge was connected to D10.... Please help
The R1+ has a different ramps board than usual. Connect the heater to D9, this is actually being controlled by pin 10 (confusing I know) and this will allow it to heat like normal