E3dv5 printfan attached to the fanduct with led option

Discussion in 'Feedback' started by Gizmo999, Feb 27, 2014.

  1. Gizmo999

    Gizmo999 Member

    Joined:
    Feb 27, 2014
    Messages:
    4
    Likes Received:
    0
    Hello im searching for a all in one solution for my makerfarm prusa .
    i want a printfan attached to the fanduct wit a option for a led or something .
    i have not to much space left because of the autobed level add on.
    most of the fanduct i find on thingiverse are to big and hitting the autobed lever.
    maybe somebody already build a custome one ?
     
  2. Sanjay

    Sanjay Administrator
    Staff Member

    Joined:
    Feb 27, 2014
    Messages:
    125
    Likes Received:
    118
    Hi Gizmo,

    The closeset i've seen to what you're after yet is this: http://www.thingiverse.com/thing:217253 which is quite compact. But still - not perfect, and probably doesn't fit all your needs.

    Sanjay
     
  3. Gizmo999

    Gizmo999 Member

    Joined:
    Feb 27, 2014
    Messages:
    4
    Likes Received:
    0
    Its a realy big shroud, im working on to make one myself
     
  4. Sanjay

    Sanjay Administrator
    Staff Member

    Joined:
    Feb 27, 2014
    Messages:
    125
    Likes Received:
    118
    Cool! Post a pic when you get it done and we'll include you as an entrant into the competition for free store credit. :D
     
  5. sauce71

    sauce71 Member

    Joined:
    Feb 28, 2014
    Messages:
    2
    Likes Received:
    0
  6. Gizmo999

    Gizmo999 Member

    Joined:
    Feb 27, 2014
    Messages:
    4
    Likes Received:
    0
    when mine is ready i will post some pics ;)
     
  7. Josh

    Josh Administrator
    Staff Member

    Joined:
    Feb 26, 2014
    Messages:
    183
    Likes Received:
    38
    Sauce71, really sweet fan fan fan mount.. :D

    You are getting some really good bridging results as well. What print settings were you using?
     
  8. sauce71

    sauce71 Member

    Joined:
    Feb 28, 2014
    Messages:
    2
    Likes Received:
    0
    This is generic natural PLA using slice3r 1.0 rc3
    Filament 1.8mm 195C 100% bridges fan speed (185C for 13cm bridge)
    Layer height: 0.25mm
    Detect bridging parameters: On
    Speed for bridges: 15 mm/s (12 mm/s for 13cm bridge test)
    Default extrusion width: slic3r default 0 (says 0.53mm in gcode file)
    Bridge flow ratio: 0.78
    I use the RepRap Calculator to calculate bridge flow rate:
    http://nathan7.eu/stuff/RepRapCalculato ... PrintSetup
     
  9. Gizmo999

    Gizmo999 Member

    Joined:
    Feb 27, 2014
    Messages:
    4
    Likes Received:
    0
    found this one on thingiverse i printed it out , but still very bulky...
    so up to the next one :)
     

    Attached Files:

    • foto.JPG
      foto.JPG
      File size:
      266.9 KB
      Views:
      1,481

Share This Page