Edge Profile (Work In Progress)

Discussion in 'Filament' started by Miasmictruth, May 27, 2016.

  1. Miasmictruth

    Miasmictruth Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    758
    Likes Received:
    112
    **Note, first time I have tried to share a profile let me know if I did it correctly**

    For those who want to give it a go this is my profile for edge. No I don't think its 100% but it might be a good starting point.

    This profile was modified from the XT profile @Alex9779 started. I have moded the scripts a little since I pulled the original from him.

    One more disclaimer, use this at your own risk this is set up for a 1.1 Titan big box non mirrored.

    *Setup up current for only printing the right nozzle working on dual and left side only
    0.1mm Layer Height (mod as you see fit)
    3d-Eez bed surface coating
    1.1 Titan Big Box

    I will mod this periodically if I find better settings

    Aria.png

    Version
    1 - 2016-05-27

    https://drive.google.com/open?id=0ByHvOzXeeoN3S0ROdmFXci16a3M
     

    Attached Files:

    #1 Miasmictruth, May 27, 2016
    Last edited: May 27, 2016
    mike01hu likes this.
  2. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
    Just to put in my two cent's again :D, if something is based on my profile I'd like to see some fork on Github and a pull request with the additions or improvements...
     
  3. Miasmictruth

    Miasmictruth Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    758
    Likes Received:
    112
    lol I guess I will have to figure out how to use Github :p I will try to do that this weekend
     
  4. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
    You're not the only one, but Git is the way to go IMHO for working on anything code related in a community...
     
  5. Miasmictruth

    Miasmictruth Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    758
    Likes Received:
    112
    Agreed, didnt really think about it for a profile but your point is well made I will work on it :)
     
  6. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
  7. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
    The profiles are XML files, nothing special... So only code... Easy to read, easy to edit, easy to merge...
     
  8. Miasmictruth

    Miasmictruth Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    758
    Likes Received:
    112
  9. gearmesh

    gearmesh Well-Known Member

    Joined:
    Feb 21, 2016
    Messages:
    162
    Likes Received:
    13
    @Alex9779 Any update to your EDGE profile? Just curious as I try to master the EDGE.
    Also...is your profile for a bowden or direct? Is it for a Titan?
     
    #9 gearmesh, Jul 17, 2016
    Last edited: Jul 17, 2016
  10. gearmesh

    gearmesh Well-Known Member

    Joined:
    Feb 21, 2016
    Messages:
    162
    Likes Received:
    13
    @Miasmictruth Any update to your EDGE profile? Just curious as I try to master the EDGE.
    Also...is your profile for a bowden or direct? Is it for a Titan?
     
    #10 gearmesh, Jul 17, 2016
    Last edited: Jul 17, 2016
  11. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
    I just added some different I it temps for first two layers for the PEI plate.
    My results were ok so far and I saw no point in tweaking...
    My hope was some people contributing their experiences cloning my profiles or posting good settings. But so far I saw nothing which was a real improvement so a specific problem so I didn't change neither temp nor retraction or anything else...
     
  12. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
    Basically it was built for direct Titan but as I said earlier it is nothing special, retraction is set to what all the others are too and so on...
     
  13. gearmesh

    gearmesh Well-Known Member

    Joined:
    Feb 21, 2016
    Messages:
    162
    Likes Received:
    13
    Thanks.
    As I find what works well I will post/share my settings.
     

Share This Page