Epic Fails

Discussion in 'Show off' started by Spoon Unit, Feb 10, 2017.

  1. Spoon Unit

    Spoon Unit Well-Known Member

    Joined:
    Sep 6, 2015
    Messages:
    1,095
    Likes Received:
    322
    We've all had em. Let's see em.

    I'll start with this:

    upload_2017-2-10_22-57-50.png
     
    eca, mike01hu and Ephemeris like this.
  2. JohnEsc

    JohnEsc Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    229
    Likes Received:
    144
  3. Jasons_BigBox

    Jasons_BigBox Well-Known Member

    Joined:
    Mar 25, 2016
    Messages:
    232
    Likes Received:
    69
    Not quite as epic but still a fail:

     
    mike01hu, Spoon Unit and JohnEsc like this.
  4. Jasons_BigBox

    Jasons_BigBox Well-Known Member

    Joined:
    Mar 25, 2016
    Messages:
    232
    Likes Received:
    69
    How's about this for an epic fail.

    Printed a bottle stopper out earlier (see Show Off Vase prints thread) and came back to do the bottle itself.

    Ran through S3D, inserted USB drive with SD card, wrote gcode and set printer going. First layer looked a bit small but didn't think more of it. Just came back to find the BB printing a stopper again............

    Between prints I'd inserted another USB drive and S3D had written the gcode to that, not to the SD card.......idiot!
     
  5. Henry feldman

    Henry feldman Well-Known Member

    Joined:
    Sep 5, 2015
    Messages:
    969
    Likes Received:
    389
    Well, I think most folks by now have seen my video of "the incident" with Nylon 910 vs. the X-Carriage/Fan/Bed

    [​IMG]
     
    Spoon Unit and Ephemeris like this.
  6. Jasons_BigBox

    Jasons_BigBox Well-Known Member

    Joined:
    Mar 25, 2016
    Messages:
    232
    Likes Received:
    69
    Feels bad to click 'like' on these!
     
    mike01hu and Spoon Unit like this.

Share This Page