Extruder stuck

Discussion in 'Calibration, Help, and Troubleshooting' started by Dominic, Sep 28, 2016.

  1. Dominic

    Dominic Member

    Joined:
    Sep 27, 2016
    Messages:
    3
    Likes Received:
    0
    Hi, i have a dual hybrid extruder and now i have a problem with my first extruder.
    It was only working 1 time and then it doesn´t work anymore.
    I also tried to switch the driver and the motors, but the only motor, that doesn´t work is the direct extruder.

    Did anyone has the same problem, or can help me?

    I realy want to print my first prints.
     
  2. A Dragon In A Pie Costume

    A Dragon In A Pie Costume Well-Known Member

    Joined:
    Jul 6, 2016
    Messages:
    203
    Likes Received:
    15
    is the hotend above 170°? its a safety feature
     
  3. Dominic

    Dominic Member

    Joined:
    Sep 27, 2016
    Messages:
    3
    Likes Received:
    0
    The Hotend is at 210°.
    i first heated the wrong one, thats why the extruder can not extrud, but then i heat nozle 2 and now the extruder didn´t work anymore.
     
  4. Dominic

    Dominic Member

    Joined:
    Sep 27, 2016
    Messages:
    3
    Likes Received:
    0
    Problem is solved. I twisted the two extruder cables.
     

Share This Page