extrusion volume level

Discussion in 'Titan' started by sungod3k, Jul 19, 2016.

  1. sungod3k

    sungod3k Active Member

    Joined:
    Aug 25, 2014
    Messages:
    26
    Likes Received:
    1
  2. elmoret

    elmoret Administrator

    Joined:
    Mar 1, 2014
    Messages:
    586
    Likes Received:
    91
    The flowrate of a polymer is far more dependent on the hotend than the extruder. The extruder might be able to generate more force, but if you need that much more force you're likely pushing polymer through that isn't fully melted.
     

Share This Page