Face shields for hospital donation sped up by dual extrusion

Discussion in 'Show-off ur skillz' started by John Meacham, Apr 9, 2020.

  1. John Meacham

    John Meacham Well-Known Member

    Joined:
    Dec 18, 2019
    Messages:
    47
    Likes Received:
    17
    The multiple extruders with different materials are greatly speeding up production of face shields, by alternating PETG and PLA shields I can print a dozen stacked on top of each other and the PLA and PETG separate nicely when split apart.



    Had some issues in the middle of this print, but you get the idea.
     
  2. Nibbels

    Nibbels Well-Known Member

    Joined:
    Dec 12, 2019
    Messages:
    164
    Likes Received:
    31
    Nice :)

    I did not use the toolchanger to stack them. But I made 150+ myself until now.
    But this model:
    Screenshot_6.jpg
    3 Printers running for two weeks now. This batch contains 73 of them:
    Screenshot_3.jpg
     
    Michael Pearson likes this.

Share This Page