Help please! Print Settings with E3D Volcano 1.2

Discussion in 'HotEnds & Extruders' started by will faust, Feb 21, 2022.

  1. will faust

    will faust New Member

    Joined:
    Feb 21, 2022
    Messages:
    1
    Likes Received:
    0
    Hello,

    I've spent the best part of 2 weeks trying to set up and calibrate my Volcano with a 1.2 nozzle. I cannot get it to print correctly without overextrusion (but under extrusion at the same time, see here for details: https://www.reddit.com/r/3Dprinting/comments/svimad/odd_layer_behaviour_e3d_volcano_12_nozzle_on/). I would be extremely grateful if anyone could advise me on the settings set, or even share a slicer settings profile? I've spent about 2 weeks trying various fixes within settings and I am yet to solve this problem.

    Thank you for any help you can provide,
    Will
     

Share This Page