hey guys, my printer is experiencing extrusion problems

Discussion in 'HotEnds & Extruders' started by charles114, Apr 12, 2021.

  1. charles114

    charles114 Member

    Joined:
    Apr 12, 2021
    Messages:
    6
    Likes Received:
    0
    我在github上使用了配置文件。simple3d的结果是填充和排出不均匀,使用prusa slicer的结果是表面存在缺陷。我想尝试咖喱。你们有cura的配置文件吗?

    这是我使用的切片配置文件是Nibbels,

    github链接是https://github.com/Nibbels/e3d-toolchanger-config
     

Share This Page