Hint: calibrating 2. extruder

Discussion in 'Calibration, Help, and Troubleshooting' started by Kick2box, Mar 18, 2016.

  1. Kick2box

    Kick2box Well-Known Member

    Mar 15, 2016
    Likes Received:
    Just because I recently ran into this trap: when calibrating both extruders the same time, then for the second extruder take into account the E-Steps you may have set before for the first one, not what you may have noted before starting the calibration process.
    Or better insert something like M92 E300 into the calibration-gcode.

Share This Page