How tall is it?

Discussion in 'BigBox General Chat' started by K3LAG, Oct 9, 2015.

  1. K3LAG

    K3LAG Active Member

    Joined:
    Oct 9, 2015
    Messages:
    43
    Likes Received:
    21
    The specs give the foot print for the printer but not the height. I need to determine if I need to make any bench modifications before the printer arrives so can you tell us how tall it is?
     
  2. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    From my observations at TCT I would say the height is very close to the width, so 55cm, but you will have to allow an extra area for the cabling/tube, about another 15-20 cm
     
  3. Sgllama

    Sgllama Active Member

    Joined:
    Sep 17, 2015
    Messages:
    26
    Likes Received:
    4
    According to replies in the KS comments, the box is 55cm and the wiring/tubing sticks up another 8cm; allow some extra and give it 75cm to 80cm in total.
     
  4. K3LAG

    K3LAG Active Member

    Joined:
    Oct 9, 2015
    Messages:
    43
    Likes Received:
    21
    I've got 65cm to 70 cm depending where I measure. It's gonna be close.

    Larry
     

Share This Page