Hybrid upgrade with just 1 extruder?

Discussion in 'Build Help' started by Henry feldman, Jul 6, 2016.

  1. Henry feldman

    Henry feldman Well-Known Member

    Joined:
    Sep 5, 2015
    Messages:
    969
    Likes Received:
    389
    OK, so I had a horrible clog, requiring me to really take apart the extruder and hot end, and clear it with a torch. Since that level of disassembly was required, figured well might as well bite the bullet and do the Misumi and 1.1 hybrid upgrade. My real plan is to go to Chase's Dual direct since that seems the thing to do. However in the meantime I have to assemble something so I can print out the new parts. I have already printed @Alex9779's hybrid lifted version and all the other parts. But given all this, I don't really want to assemble and disassemble parts I don't need. Can I just not put any of the extruder 2 (Bowden) parts including the hot-end on and just use it as a Pro to print out the parts for the Dual Direct Titan? @Alex9779 ?
     
  2. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
    That's what I did... But there are really no special parts for the second hotend anymore... It is just the grub screws holding the hotend and the hotend itself, and of course the Titan mounted on the back plane....
     
    Alex Stevenson likes this.

Share This Page