I need some help setting up marlin auto leveling

Discussion in 'General' started by nikki81, Oct 3, 2016.

  1. nikki81

    nikki81 Member

    Joined:
    Oct 3, 2016
    Messages:
    3
    Likes Received:
    0
    am using Marlin 1.1.0-RC6 my probe is 32mm on the right of the nozzle and 15mm behind the nozzle my bed is 400mm along the x axis and 300mm along the y axis what do i need to do to get it to work correctly ? Ive read and watched that many tutorials now is started to become very confusing because everyone is using a different version of marlin.

    #define LEFT_PROBE_BED_POSITION ?
    #define RIGHT_PROBE_BED_POSITION ?
    #define FRONT_PROBE_BED_POSITION ?
    #define BACK_PROBE_BED_POSITION ?


    Thanks Nikki
     
  2. Syko_Symatic

    Syko_Symatic Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    365
    Likes Received:
    106
    Those are your defined max dimensions. Think of it as you limiting box for your probe. If you have set anything up for the probe offsets it will take that into account. My advice would be start with a smaller box and expand it when you understand what's happening.
     

Share This Page