Kraken CAD Model

Discussion in 'Multi-Extrusion' started by Mike Kelly, Mar 19, 2014.

  1. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 7, 2014
    Messages:
    444
    Likes Received:
    89
    THE KRAKEN

    Team E3D has recently launched their 4 nozzle bowden fed extruder. I made this for everyone out there looking to integrate this monster into their 3D printer, as it can be useful to have an accurate model to work off of.

    [​IMG]

    This model was generated using dimensions provided here: http://e3d-online.com/Documentation A big thanks to Josh and Sanjay for providing these drawings at (essentially) my request.

    [​IMG]

    It should be noted the heat block represented is from V4, but should be very close to V5.3 and v5.5. If there is demand the model can be updated to include the latest heat block.

    [​IMG]

    I have included step, solidworks, and stl files. Please let me know if additionals need to be generated either here or on one of these sources:

    Download:

    Thingiverse: http://www.thingiverse.com/thing:236596

    Grabcad: https://grabcad.com/library/e3d-kraken-quad-extruder-1
     
  2. enggmaug

    enggmaug Member

    Joined:
    Mar 14, 2014
    Messages:
    7
    Likes Received:
    0
    Thank you mkelly.

    I already used your model to validate my Rostock Magnetic arms Effector for Kraken.

    It helped a lot. I'll have some modifications to make to my effector, and I'll use your model again.
     

Share This Page