My tallest print ever!

Discussion in 'Show off' started by Alex9779, Mar 22, 2016.

  1. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,411
    Likes Received:
    735
    Ok it is just the rocket everybody prints, but my son wanted one...
    IMG_0239.JPG IMG_0240.JPG IMG_0241.JPG
    As you can see I did at least one error, I forgot to deactivate the retraction Z hop, so I have a nice Z seam.

    But I made a time lapse of it:
    https://youtu.be/msrW2h8kaH4
     
    #1 Alex9779, Mar 22, 2016
    Mike Kelly, mike01hu and PsyVision like this.
  2. PsyVision

    PsyVision Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    798
    Likes Received:
    248
    Nice print!
     
    #2 PsyVision, Mar 22, 2016
  3. mike01hu

    mike01hu Well-Known Member

    Joined:
    Apr 22, 2014
    Messages:
    957
    Likes Received:
    166
    #3 mike01hu, Mar 22, 2016
  4. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,411
    Likes Received:
    735
    Well that's mostly because I fixed the layer change pos to X0 Y0 in S3D.
    It is a Z change time lapse with OctoPrint but with my patch I developed to only snapshot at real Z changes... It is merged to the Devon branch of OctoPrint. Hope it will be in the next release... Gina is working hard to get it out...
     
    #4 Alex9779, Mar 22, 2016
    Mike Kelly and mike01hu like this.
  5. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 7, 2014
    Messages:
    446
    Likes Received:
    91
    Sweet timelapse and clever method of getting synchronization of layer change position
     
    #5 Mike Kelly, Mar 25, 2016
(You must log in or sign up to post here.)

Share This Page