Nefertiti in Hemp

Discussion in 'Show off' started by Henry feldman, Mar 25, 2016.

  1. Henry feldman

    Henry feldman Well-Known Member

    Joined:
    Sep 5, 2015
    Messages:
    969
    Likes Received:
    389
    Decided Nefertiti needed a more natural substance than PLA (corn hadn't been invented yet!) so went with Entwined from 3DOM for the first time. OK, this stuff prints great. It gets darker and more organic looking at 210C, I printed at 200C at 1.5mm layers. While the laters are visible they really are smooth, this stuff really is very heterogenous so will look layered no matter how smooth. The few supports I used under the chin (2mm), nose and the ear came off like butter (the back was totally unsupported)

    [​IMG]

    [​IMG]
     
  2. Kick2box

    Kick2box Well-Known Member

    Joined:
    Mar 15, 2016
    Messages:
    198
    Likes Received:
    27
    Hemp really seems to be great stuff!
     
  3. Sarah Nicholson

    Sarah Nicholson Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    319
    Likes Received:
    114
    I'd never heard of this filament before, but it looks great. Nice print!
     
  4. Henry feldman

    Henry feldman Well-Known Member

    Joined:
    Sep 5, 2015
    Messages:
    969
    Likes Received:
    389
    Smells a tad earthy on printing, but once hardened is great... I have to try their beer one... I mean beer and hemp, sounds like college!!!
     
    mike01hu and Sarah Nicholson like this.
  5. wfredette

    wfredette Well-Known Member

    Joined:
    Jan 11, 2016
    Messages:
    89
    Likes Received:
    25
    That is awesome!
     
  6. Miasmictruth

    Miasmictruth Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    758
    Likes Received:
    112
    Have a link or a manufacturer of the filament?
     
  7. Rob Heinzonly

    Rob Heinzonly Well-Known Member

    Joined:
    Sep 20, 2015
    Messages:
    362
    Likes Received:
    125
  8. Henry feldman

    Henry feldman Well-Known Member

    Joined:
    Sep 5, 2015
    Messages:
    969
    Likes Received:
    389
    Yep, it is Entwined from 3DomUsa (or is it now 3DDomFuel or something? Didn't they just announce a merger and an upcoming name change). Anyway, yes, 3DomUsa has the Hemp and Beer based formulas...
     
  9. Skinny Kid

    Skinny Kid Member

    Joined:
    Nov 7, 2015
    Messages:
    6
    Likes Received:
    1
    I have tried Entwined, Buzzed and Wound Up (Coffee) filaments from 3DOM. All of them are excellent to print with.

    Note: I am on an Ultimaker 2 (Someday I will have the Big Box!)
     

Share This Page