Newbie in over his head

Discussion in 'Build Help' started by Crumplebutt, Sep 28, 2021.

  1. Crumplebutt

    Crumplebutt New Member

    Joined:
    Sep 28, 2021
    Messages:
    1
    Likes Received:
    0
    Hello!
    So I bought a big box second hand and have zero idea what I'm doing. I got the test cylinder on the sd card to print just fine but anything else I try to print just doesn't work at all. I tried to find a profile for Slic3r and I'm finding nothing. Everything I try to print myself just comes to the bottom left corner and just goops all over the edge of the build plate. All I want to do is print upgrades for board games. Where the hell do I start here? Please help.
     
  2. Greg Holloway

    Greg Holloway Administrator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    1,022
    Likes Received:
    631
  3. GrodanB

    GrodanB Well-Known Member

    Joined:
    Feb 3, 2016
    Messages:
    211
    Likes Received:
    29
    After you read that and made sure all is tight and true. Then you need to mechanically level the bed.

    This ensure the XY gantry is as parallel to the bed as it can be. The rest is done in software.

    I run the Duet 2 WIFI so if yours do that to I might be able to add some G-files how I level my bed...

    My Bigbox is currently taken apart becase I'm rebuilding it adding the titan aero Idex... bought that upgrade years ago but never put it on...

    So you need to specify your set-up so we know how to support you.
     

Share This Page