Octopi addins

Discussion in 'Calibration, Help, and Troubleshooting' started by SoBaldrick, Mar 22, 2016.

  1. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    @Greg Holloway, in the octopi setup section, you suggest some addins, which I have added

    with the printer statistics addin, what are the wattage settings.
     
  2. Greg Holloway

    Greg Holloway Administrator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    565
    Likes Received:
    397
    Bed is 200W
    Hotends are 30W each
    Motors 0.6W I think
    Electronics ~15W
     
    Pierce and Mike Kelly like this.
  3. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
  4. JohnEsc

    JohnEsc Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    229
    Likes Received:
    144
    Found this post yesterday and just made these changes under settings as well.
     

Share This Page