Parametric Design Job using ABS

Discussion in 'Show off' started by gonzalo, Dec 14, 2016.

  1. gonzalo

    gonzalo Well-Known Member

    Joined:
    Mar 17, 2016
    Messages:
    164
    Likes Received:
    93
    I printed this parametric design for a client, 15 hour print using ABS, no warping, no splitting, just a little bit of lifting from the bed in one corner. ( by the way, the "HOME" corner of the bed is -by far- the coolest end of the bed).
    The part is 15cm tall by 9cm diameter.

    File Dec 14, 10 04 11 AM.jpeg File Dec 14, 10 04 57 AM.jpeg File Dec 14, 10 05 29 AM.jpeg File Dec 14, 10 05 49 AM.jpeg File Dec 14, 10 06 10 AM.jpeg File Dec 14, 10 06 38 AM.jpeg File Dec 14, 10 07 02 AM.jpeg File Dec 14, 10 07 19 AM.jpeg
    Support came out easily, love it!
    Now if I can get the independent extruder upgrade and use soluble support... I will be in 3d printing heaven! :D
     
  2. Syko_Symatic

    Syko_Symatic Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    348
    Likes Received:
    78
    That is amazing! What support settings are you using?
     
  3. gonzalo

    gonzalo Well-Known Member

    Joined:
    Mar 17, 2016
    Messages:
    164
    Likes Received:
    93
    I will snapshot all the S3D screens for you, as soon as I can get back to that.
     
  4. Jasons_BigBox

    Jasons_BigBox Well-Known Member

    Joined:
    Mar 25, 2016
    Messages:
    232
    Likes Received:
    69
    That is a thing of beauty!
     
  5. Henry feldman

    Henry feldman Well-Known Member

    Joined:
    Sep 5, 2015
    Messages:
    969
    Likes Received:
    389
    whoa! really nice work.
     
  6. gonzalo

    gonzalo Well-Known Member

    Joined:
    Mar 17, 2016
    Messages:
    164
    Likes Received:
    93
    Sorry it took me so long. IMG_6486.JPG
     
    Syko_Symatic likes this.
  7. cez

    cez Well-Known Member

    Joined:
    Apr 4, 2016
    Messages:
    105
    Likes Received:
    19
    Could i ask what s3d settings you are using for abs?, beautiful print btw
     
  8. Hans C.

    Hans C. Well-Known Member

    Joined:
    Dec 21, 2015
    Messages:
    129
    Likes Received:
    43
    Gotta love the way S3D handles support. Impressive print!
     
  9. gonzalo

    gonzalo Well-Known Member

    Joined:
    Mar 17, 2016
    Messages:
    164
    Likes Received:
    93
    Honestly, I don't have the exact profile any more, I am addicted to tweaking settings, so I find myself changing stuff all the time, it is zortrax Z-ABS that prints at 260-270, printed at 50mm/s and you can see the support settings above in this post. sorry I couldn't give you any better info.
     
  10. TimV

    TimV Well-Known Member

    Joined:
    Mar 13, 2016
    Messages:
    151
    Likes Received:
    26
    Just for your info : If you have the Gcode file, the parameters are readable inside the file. ( rename the file to a .txt extension, and it pops open :) )

    Niice print btw!
    (Any way to share you Gcode file?)
     
  11. gonzalo

    gonzalo Well-Known Member

    Joined:
    Mar 17, 2016
    Messages:
    164
    Likes Received:
    93
    I stream via USB, I don't store gcode files, if s3d stores them somewhere, then I can pull It for you?
     

Share This Page