PID Auto Tune Will Not Go Over 150deg

Discussion in 'Calibration, Help, and Troubleshooting' started by Syko_Symatic, Mar 17, 2016.

  1. Syko_Symatic

    Syko_Symatic Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    365
    Likes Received:
    106
    I start PID auto tune with M303 E0 S215 C8 only it seems to do the tuning at 150deg. I can not get it to go higher. When I print it works fine and gets to 215 without and issue. Anyone experiencing this?
     
  2. Syko_Symatic

    Syko_Symatic Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    365
    Likes Received:
    106
    Scratch that turns out it must be done from stone cold!
     

Share This Page