PLA makes an excellent support material for Nylon CF

Discussion in 'Getting Started' started by John Meacham, Sep 14, 2021.

  1. John Meacham

    John Meacham Well-Known Member

    Dec 18, 2019
    Likes Received:
    The nylon print just pulls straight out of the support matrix with zero residue. works perfectly. for reference this is sainsmart nylon-CF and PolyTerra PLA with a PEI bed with bed weld on it. 65C bed, 250C nylon and 215C PLA. The second image is the part after a single yank on the top of it and zero post processing. just pulled it out of the supports and set it down.

    PXL_20210914_025300901.jpg PXL_20210914_025631886.jpg

Share This Page