COMPLETE Printed LCD enclosure

Discussion in 'Guides, Mods, and Upgrades' started by Rob Heinzonly, Jun 7, 2016.

  1. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,411
    Likes Received:
    735
    IT IS STICKY! :D
     
  2. eca

    eca Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    229
    Likes Received:
    44
    Hey, I just started to print this, moved the orientation so the hole for the display is facing down (I was worried about the large overhang) but for some reason S3D fills in the hole for the display and the inner supports for attaching the display. Is there something wrong with my settings or is it the model needs to be printed in only the orientation that it was made in? Sorry, it is driving me crazy the holes are filled in when slicing things. I don't know if it has anything to do with the new update to S3D. I never had problems before.
     
  3. Rob Heinzonly

    Rob Heinzonly Well-Known Member

    Joined:
    Sep 20, 2015
    Messages:
    448
    Likes Received:
    174
    I did some quick tests, but all goes well, with the right settings....
    [​IMG]

    Did you switch off the 'Include Raft' setting ?
    [​IMG]
     
  4. eca

    eca Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    229
    Likes Received:
    44
    I just tried it again and it all worked fine. Strange, but thanks for checking.
     

Share This Page