Ravenclaw Crest - PLA/PHA 0.065m

Discussion in 'Show off' started by Sean, Aug 13, 2016.

  1. Sean

    Sean Member

    Joined:
    Jun 16, 2016
    Messages:
    19
    Likes Received:
    8
    Decided to try pushing the limits of Z resolution on the printer - think it turned out pretty well!

    2016-08-13 10.21.42.jpg
     
  2. eca

    eca Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    218
    Likes Received:
    41
    It looks great (and here is the but), but is it possible that there is a little over extrusion going on? It was printed on its back right? For being printed at 65micron layer height you can really see the layers well. I have printed things at 100microns and the layers are almost indistinguishable, depending on the filament of course.
     

Share This Page