Reading temps set in Gcode?

Discussion in 'Tool heads & ToolChanger' started by Brad Ruprecht, Jan 19, 2021.

  1. Brad Ruprecht

    Brad Ruprecht Member

    Joined:
    Nov 24, 2020
    Messages:
    4
    Likes Received:
    0
    Hello all. I am getting my labs Toolchanger up and running.. One thing that seems like and easy fix but is beyond me is having the machine follow the set hotend temps in the sliced gcode for a multi material part being built. It starts off where I preheat everything. Then after a tool change the temps drop to another temp. I'm assuming there is a macro somewhere or something in firmware that is changing this? I do have a purge sequence activated between heads. I'm not really seeing it in there though.

    Any pointers would be appreciated.
     

Share This Page