Regarding PrusaSlicer 2.3.0, used with pspp, temperature management issues

Discussion in 'Troubleshooting' started by charles114, May 21, 2021.

Tags:
  1. charles114

    charles114 Member

    Joined:
    Apr 12, 2021
    Messages:
    8
    Likes Received:
    0
    Dear friends:
    My E3D Toolchanger is still debugging so far. Currently my machine only has two nozzles. My slicing software is PrusaSlicer 2.3.0, used with pspp, but I encountered a problem during the debugging process:
    Two print heads printing:
    When the No. 0 nozzle is activated, the working temperature of No. 0 nozzle is 200 and the idle temperature of No. 1 nozzle is 170.
    However, when the No. 1 nozzle is activated, the working temperature of the No. 1 nozzle is also 170. The idle temperature of the No. 0 nozzle is 170 normal.
    I checked the parameter settings of my PrusaSlicer, and the working temperature of the print head is 200.
    Please check my configuration parameters:
    63291af259cc06175a0429821b8cff9.png
    74f24d9d74df5419665d96eaec529d6.png

    May I ask what causes this?
    Looking forward to your reply.
     

Share This Page