Ringing on a Print at 30mm/s

Discussion in 'Calibration, Help, and Troubleshooting' started by Liam Woinson, May 4, 2016.

  1. Liam Woinson

    Liam Woinson Member

    Joined:
    Feb 9, 2016
    Messages:
    21
    Likes Received:
    0
    I have printed this off what I designed and seem to be getting ringing around some spots of it not sure why.

    30mm/s
    2 walls
    25% infill
    0.3mm nozzle
    0.11mm layers
     

    Attached Files:

  2. mike01hu

    mike01hu Well-Known Member

    Joined:
    Apr 22, 2014
    Messages:
    957
    Likes Received:
    166
    That's not ringing it is too regular and not fading away, it looks like a vibration. This can be due to a belt out of alignment such that it is catching on the edge of a pulley or a part of the frame. It could also be due to a belt being too tight.
     

Share This Page