simplify 3d profiles

Discussion in 'BigBox General Chat' started by KNM3D, Dec 23, 2015.

  1. KNM3D

    KNM3D Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    150
    Likes Received:
    4
    do we know where to get the basic starter profiles for the various materials we are now able to print on the bigbox?

    not saying anything crazy perfect. but profiles setup so out prints look decent when printed with the various materials offered.

    thankyou again,
    Ryan M
     
  2. Richard Barbosa

    Richard Barbosa Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    48
    Likes Received:
    24
    I thought Simplify would have added the BigBox by now. I believe it is Sanjay's preferred software and I'm sure they have developed and worked with a substantial amount of different profiles during the development of the BigBox.
     
  3. KNM3D

    KNM3D Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    150
    Likes Received:
    4
    so they should already be loaded into S3D?
     
  4. mike01hu

    mike01hu Well-Known Member

    Joined:
    Apr 22, 2014
    Messages:
    957
    Likes Received:
    166
    Sanjay has already indicated that there will be a comprehensive set of profiles available for S3D.
     
  5. KNM3D

    KNM3D Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    150
    Likes Received:
    4
    where do I find these?
     
  6. Steve W

    Steve W Member

    Joined:
    Sep 4, 2015
    Messages:
    13
    Likes Received:
    13
  7. PsyVision

    PsyVision Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    798
    Likes Received:
    248
    There are some more profiles on the e3d file server (where the STL files for the BigBox are).
     
  8. Falc.be

    Falc.be Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    244
    Likes Received:
    38
    I have used the experimental and dual with good results. I copied all settings for colorfabb XT from another profile. and I am looking for a profile for scaffold on the original extruders/carriage

    There has not been a single update for S3D in almost a year, don't know whats going on there
     
    #8 Falc.be, Apr 21, 2016
    Last edited: Apr 21, 2016
  9. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
    I am wondering too. It is about time for an update...
     
  10. KNM3D

    KNM3D Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    150
    Likes Received:
    4
  11. Rob Heinzonly

    Rob Heinzonly Well-Known Member

    Joined:
    Sep 20, 2015
    Messages:
    362
    Likes Received:
    125
    You can download the profile file and import it in E3D. You can find it in the File menu.
     

Share This Page