Hi, I tried searching on here and Google, but I haven’t been able to find a solution. I have a Creality CR-10 V2/V3 and installed a 24v Hemera. Everything is working perfectly with the exception of the hot end thermistor. The hot end is showing about 10c colder than the bed at room temp. Currently the hot end is showing 13c and the bed is 23c. My home temp is right around 23c/74f. I’ve made sure that I changed the thermistor settings in configuration.h from 1 to 5 with the following setting: TEMP_SENSOR_0 5 I’m not sure if there are any other settings that I need to modify or if there is a way to calibrate the thermistor? I appreciate any assistance. Thanks!