Spare T-Nuts

Discussion in 'Motion System' started by twam, Sep 23, 2019.

  1. twam

    twam Active Member

    Joined:
    Aug 29, 2019
    Messages:
    31
    Likes Received:
    8
    Is there a way to purchase spare T-Nuts (maybe even with the screws)? My set was missing one for the earth connection and the online nut I find in the store (https://e3d-online.com/t-nut-6mm) seems to be smaller.
     
  2. Spoon Unit

    Spoon Unit Well-Known Member

    Joined:
    Sep 6, 2015
    Messages:
    1,561
    Likes Received:
    483
    I think these are the ones you'd want if you wanted the same ones.

    https://www.amazon.co.uk/Thread-Eur...rds=t-nut+30&qid=1569282690&s=diy&sr=1-3&th=1

    The extrusion is 3060.

    There's are other options though. Those T nuts on that link also come in M3, for which you might (I do for sure) have more screws handy. Yet another option is to print some. I appreciate you couldn't use a printed one for earthing, but you could swap some around. I used this model to print additional T nuts I needed:

    https://www.thingiverse.com/thing:3199057

    This has M3, M4, and M5 versions, so you could make something to suit. I happened to have M3 nuts and screws in abundance so went with that sizing.
     
  3. Norman Thompson

    Joined:
    Sep 18, 2019
    Messages:
    7
    Likes Received:
    0
    You need Series 30 T-nuts
     

Share This Page