Status detection light.

Discussion in 'Tool heads & ToolChanger' started by wanwanwudi, Mar 17, 2022.

  1. wanwanwudi

    wanwanwudi Member

    Joined:
    Mar 21, 2021
    Messages:
    3
    Likes Received:
    1
    Hi everyone, I have made a status detection light board on an aluminum base plate and I want to use it to check the status of the printer. Can it be realized, as well as the display of tool retraction, idling, tool change, etc.? Screenshot_20220317_144612_com.tencent.mm_edit_286717914956771.jpg
     

    Attached Files:

    • PCB.zip
      File size:
      1.2 MB
      Views:
      1
    #1 wanwanwudi, Mar 17, 2022
    Last edited: Mar 17, 2022
    jason lipavsky likes this.
  2. Greg_The_Maker

    Greg_The_Maker Administrator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    1,035
    Likes Received:
    633
    How does it wire up?

    What LED is to be used?
     
  3. wanwanwudi

    wanwanwudi Member

    Joined:
    Mar 21, 2021
    Messages:
    3
    Likes Received:
    1
    A WS2812b lamp bead is used in the middle. While the DUET3 6HC can connect RGB Neopixels (up to 60 LEDs), unfortunately I can't find anyone using a light bar. Since it exists, how should it be configured?
     
  4. Greg_The_Maker

    Greg_The_Maker Administrator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    1,035
    Likes Received:
    633

Share This Page