Super Volcano and Zesty Nimble combo

Discussion in 'Volcano' started by Colin Bell, Jan 17, 2020.

  1. Colin Bell

    Colin Bell New Member

    Joined:
    Jan 17, 2020
    Messages:
    1
    Likes Received:
    0
    Hi all,

    I've built a large format delta with the above extruder and hot end - whilst I'm getting good result, it's very slow to print due to the jerk and acceleration settings required for the Nimble, which isn't showing off the capabilities of the printer. I've brought the settings up as far as I can, but those settings are making my prints way too slow for such a big machine (650 XY, 1.1m Z).

    My thinking is that I likely need to change extruder solutions to get the speeds up - so what is the current favourite suitable for a delta with a Super Volcano and a 1.2mm nozzle?
     

Share This Page