T-Rex Skull

Discussion in 'Show off' started by SoBaldrick, Jul 13, 2016.

  1. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    Well the Skull part is finished, at 130% in glow in the dark PLA, will post another picture when it is dark...

    17 hours to print.

    DSC01002.JPG

    Jaw stated now, only about 7 hours for that
     
  2. cez

    cez Well-Known Member

    Joined:
    Apr 4, 2016
    Messages:
    105
    Likes Received:
    19
    what are your slicer settings?
     
  3. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    I use Simplify3D, but it was printed with a 0.25 nozzle, 0.2 layer, 10 % infil, bed 65 head 210, fan at 100%

    Jaw took another 10 hours, so will take a photo of them both tonight.
     
    cez likes this.
  4. cez

    cez Well-Known Member

    Joined:
    Apr 4, 2016
    Messages:
    105
    Likes Received:
    19
    Great :) I'd love to see the final print, is it possible to look at your .fff for Simplifi3d?
     
  5. Spoon Unit

    Spoon Unit Well-Known Member

    Joined:
    Sep 6, 2015
    Messages:
    1,095
    Likes Received:
    322
    That almost looks impossible to print without support. I think the angle of the picture is hiding the actual angle of the horizontal-looking teeth.
    What a great looking print!.
     
    #5 Spoon Unit, Jul 18, 2016
    Last edited: Aug 9, 2016
  6. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    Just got the support bar to print, then finished. but printing an Orange T-Rex skeleton at the moment for my Brother.
     
    #6 SoBaldrick, Jul 18, 2016
    Last edited: Jul 18, 2016
  7. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    Glow for it :rolleyes:

    DSC00510.JPG
     
    eca, mike01hu and Sarah Nicholson like this.
  8. Steven Burns

    Steven Burns Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    195
    Likes Received:
    55
    A friend of mine is really into Dinosaurs so it have printed a few of these for him. Love the glow in the dark and nice print!
     
  9. eca

    eca Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    218
    Likes Received:
    41
  10. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    I've printed two of those so far :)
     
    eca likes this.

Share This Page