Three-Axis Tourbillon

Discussion in 'Show off' started by SoBaldrick, Aug 15, 2016.

  1. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    Working on this at the moment - http://www.thingiverse.com/thing:1624844

    Inner movement completed. all printed with 0.25 nozzle except the spring, 0.25 did not work, but printed fine with 0.4 nozzle.

    IMG_0505.JPG
     
    Spoon Unit, eca and Sarah Nicholson like this.
  2. PsyVision

    PsyVision Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    798
    Likes Received:
    248
    How well does it tick?

    I printed one of the tourbillion watch/clocks in 0.4 in PLA and it doesn't tick at all. The tick tock catch mechanism (don't know the name off hand) doesn't work very well for some reason.
     
  3. SoBaldrick

    SoBaldrick Well-Known Member

    Joined:
    Sep 15, 2015
    Messages:
    99
    Likes Received:
    66
    @Psy, It ticks very well, wil ltry to post video leter.
     
    Colin and PsyVision like this.

Share This Page